5 Best 10 Inch Miter Saws In 2021

Share on facebook
Share on twitter
Share on email
Share on whatsapp
Table of Contents

The general consensus with carpentry and woodworking is such that it’s merely limited to a certain set of tools and a piece of wood. However, there’s much more to the craft. In order to get the perfect cut, you must have a very specific type of tool in your arsenal. A commonly seen cut in woodworking is the miter cut wherein an angled cut is made across the face, or width, of a board. This type of cut is mostly used for molding, trim work, rafters, etc. Though on face value, the miter cut sounds very generic, it can only be achieved perfectly by using a good quality miter saw.

5 Best 10 Inch Miter Saws In 2021

Miter saws come in a variety of sizes and some even with unorthodox ergonomics. However, what stays constant throughout is the objective that is to get a miter cut. When it comes to using a miter saw, it doesn’t require a lot of learning. However, one must make sure that they go for the right product at the time of purchasing. Maneuverability is something which must be kept in mind as some miter saws come with an adjustable blade while some only allow you to fix a certain size of wood for cutting. Considering the variation in design between manufacturers, the cuts produced may also vary slightly. But to make things easy, the market splits miter saws into 2 main types – 10 inches and 12 inches. In this article, we will be providing you with a list of the 5 best 10 inch miter saws in 2021 alongside a load of other additional information.

Editor’s Picks: 3 Of The Best 10 Inch Miter Saws In 2021

Best Overall
Compound Miter Saw, TACKLIFE 10-Inch Sliding Miter Saw, with Double Speed (4500 RPM & 3200 RPM), 15...
Evolution Power Tools R255SMS+ 10" Multi-Material Compound Sliding Miter Saw Plus
Best In Budget
Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker
Product
Compound Miter Saw, TACKLIFE 10-Inch Sliding Miter Saw, with Double Speed (4500 RPM & 3200 RPM), 15...
Evolution Power Tools R255SMS+ 10" Multi-Material Compound Sliding Miter Saw Plus
Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker
Price
$219.00
$256.96
$206.61
Our Verdict
It comes with a sliding nature that allows to work with longer pieces of wood. It is ideal for making both bevel cuts and miter cuts but its most significant feature is the chip bag accessory connection which makes sure that all waste is collected in a separate place.
It has a multipurpose blade that allows users to work with various kinds of materials. It can be used for both bevel and miter cuts while also being quite precise thanks to the inbuilt laser marker system that this product comes with.
A light in weight yet powerful carpentry is usually unheard of but this product is exactly that. It has a 15 amp motor that allows users to work with a lot of materials while the brand also provide a whopping 5 years of warrant. Highly recommended product.
Best Overall
Compound Miter Saw, TACKLIFE 10-Inch Sliding Miter Saw, with Double Speed (4500 RPM & 3200 RPM), 15...
Product
Compound Miter Saw, TACKLIFE 10-Inch Sliding Miter Saw, with Double Speed (4500 RPM & 3200 RPM), 15...
Price
$219.00
More Info
Our Verdict
It comes with a sliding nature that allows to work with longer pieces of wood. It is ideal for making both bevel cuts and miter cuts but its most significant feature is the chip bag accessory connection which makes sure that all waste is collected in a separate place.
Evolution Power Tools R255SMS+ 10" Multi-Material Compound Sliding Miter Saw Plus
Product
Evolution Power Tools R255SMS+ 10" Multi-Material Compound Sliding Miter Saw Plus
Price
$256.96
More Info
Our Verdict
It has a multipurpose blade that allows users to work with various kinds of materials. It can be used for both bevel and miter cuts while also being quite precise thanks to the inbuilt laser marker system that this product comes with.
Best In Budget
Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker
Product
Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker
Price
$206.61
More Info
Our Verdict
A light in weight yet powerful carpentry is usually unheard of but this product is exactly that. It has a 15 amp motor that allows users to work with a lot of materials while the brand also provide a whopping 5 years of warrant. Highly recommended product.

5 Best 10 Inch Miter Saws In 2021 Reviewed

01.

1. TACKLIFE 10-Inch Sliding Miter Saw

Buy On Amazon

Starting it off, we have the TACKLIFE 10-Inch Sliding Miter Saw that comes with a compound nature. This means that you can use it to produce both miter cuts and bevel cuts. Thanks to its sliding ergonomics, users of this miter saw are allowed to work with wood that is bigger than the saw itself. But this product is not limited to just wood as you may even use it to slice through plastic or metal.

The Tacklife EMS01A miter saw is equipped with 3 blades: two 10″ 40T TCT blades for wood and plastic, and one multifunctional 10″ 48T TCT blade for versatile use. You also get 2 speed levels with this product which come in at 3200 RPM and 4500 RPM. In terms of durability, the brand promises a long-lasting product which is hard to debate against considering that the saw is made out of solid iron self-retracting saw shield and stainless steel castings.

Since working with the saw is likely to release a lot of dust and wood particles, the saw comes with a feature that allows you to connect a chip bag directly to it. Hence, all of the waste that is produced during your cutting endeavors is collected in a separate area which saves a lot of effort long-term. When it comes to the warranty, you get a 2 year warranty with the product.

Compound Miter Saw, TACKLIFE 10-Inch Sliding Miter Saw, with Double Speed (4500 RPM & 3200 RPM), 15...
  • 🎅2 Adjustable Speed & 3 Blades: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal. While the Tacklife EMS01A miter saw is equipped with 3 blades: two 10" 40T TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation.
  • 🎅Bevel Cutting & Laser Guide: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes.The Angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45°, respectively.The laser is attached to accurately track real-time position and allows you to perform precise cutting.
PROS:
  • Sliding nature allows to work with longer pieces of wood
  • Produces both miter and bevel cuts
  • Chip bag connection feature helps a lot
  • 2-year warranty
CONS:
  • May not be the best for commercial use

2. DEWALT DW713 10 in. Portable Compound Miter Saw

Buy On Amazon

When it comes to carpentering tools, Dewalt has established itself as one of the market’s greatest. Their products are known for their sturdiness and ease of use. The DW713 10 in. Portable Compound Miter Saw is a prime example of such a product. It easily rips through wood making woodwork quite simple and satisfying for the user. Being a compound miter saw, you can also use it for other types of cuts.

The DW713 10 in. Portable Compound Miter Saw is equipped with a 15 Amp, 5,000 rpm motor that provides both power and durability. It also comes with a stainless steel miter detent plate and a cam miter lock that provide repeatable accuracy and durability with easy adjustments. For bevel cuts, the saw comes with tall sliding fences.

Despite sporting such a high level of power, the saw only comes in at a weight of 35 pounds. For portability, the saw has a built-in carry handle which makes it quite easy to carry around the jobsite. The brand also caters to beginners as you can also buy a laser attachment (DW7187 adjustable miter saw laser system) separately for the saw to make sure of the cutting path while working. The warranty of this product is also quite impressive as you get a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

DEWALT 10-Inch Compound Miter Saw (DW713)
  • 15 Amp, 5,000 rpm motor delivers extended power and durability
  • Stainless steel detent plate with 11 positive stops provides repeatable accuracy and jobsite duability
PROS:
  • Very high power
  • Easy to use
  • Compound nature allows for numerous types of cuts
CONS:
  • Not ideal for large cuts

3. Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw

Buy On Amazon

10 inch miter saws get a bad rap in the world of professional carpentry with many arguing that they just aren’t powerful enough to be used for different types of cuts. While the notion is somewhat correct, the Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw is one of the very few products that goes out of the norm.

The C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw is very light in weight weighing roughly 26 pounds. However, in spite of that, it is loaded with a 15 amp motor that is powerful enough for the toughest of woodworking. Adding to that, its design is quite attractive while its maneuverability is such that even novices can work with it very easily. Speaking of which, the saw comes with an attached laser marker system that allows for extra precision.

The saw has a 0 52 Degree miter angle range both towards the left and the right. As for bevel cuts, you get a 0 45 Degree bevel angle range with this product. Since it comes from a reliable brand, you get an insane five years of warranty with this saw.

Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker
  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
  • Hitachi's Laser Marker System for increased cutting accuracy
PROS:
  • Easy to use thanks to the inbuilt laser marker system
  • Very light in weight
  • Compatible with multiple types of material
  • 5 years of warranty
CONS:
  • Despite being quite tough, users have complained about the saw not being ideal for cutting metal
woman working with a miter saw

4. Evolution Power Tools R255SMS+ 10″ Multi-Material Compound Sliding Miter Saw Plus

Buy On Amazon

Although miter saws are a revolutionary carpentering tool, they come with the limitation of blade changing. What this means is, every time the user wishes to with a different kind of material, they would have to manually change the blade of their miter saw. However, if you purchase the Evolution Power Tools R255SMS+ 10″ Multi-Material Compound Sliding Miter Saw Plus, this problem won’t see the light of day.

The saw’s blade is designed to cut a wide range of materials such as aluminum, plastic pipes, mild steel, wood with nails, etc. As for power, it is equipped with a 15 amp hi-torque motor with a top speed of 2500 RPM. It also comes with a laser marker system for high precision. It has a 0° – 45° bevel tilt while also having quick click miter stops at 0˚, 15, 22.5, 30, and 45˚ both left & right in its arsenal. The warranty of this product stands at 3 years which goes a long way.

Evolution Power Tools R255SMS+ 10" Multi-Material Compound Sliding Miter Saw Plus
  • Designed to cut a wide range of materials without changing blades
  • Impressive hi-torque motor, 15 amp saw with adjustable depth and laser precision guidance
PROS:
  • Multipurpose blade
  • Compound nature allows for bevel cuts
  • Laser marker system provides precision
  • 3 years of warranty
CONS:
  • Although it has a multipurpose blade, it might not be ideal for cutting stainless steel

5. Makita LS1018 10-Inch Dual Slide Compound Miter Saw

Buy On Amazon

No matter what the industry is, there is always certain brands that are known for providing excellence in a particular attribute. When it comes to Makita, it is durability that is of the highest level. The LS1018 10-Inch Dual Slide Compound Miter Saw is a great example of such a product.

The miter saw has a 13.0 AMP direct drive motor that not only requires very less amount of maintenance but also comes with an impressive speed of 4300 RPM. It allows for 0 degree to 47 degree left and 0 degree to 60 degree right miter cuts with stops set at 0 degree, 15 degree, 22.5 degree, 31.6 degree, and 45 degree (left and right). For bevel cuts, the saw has a rear handle bevel lock that adjusts to 0 degree and 45 degree.

With great power comes a heavy weight and this product has exactly that. It weighs roughly 45 pounds which makes it quite tough to carry around. However, once set, it is quite easy to work with due to its laser guidance system. The warranty of this product is 1-year only, though you do get a 30-day satisfaction guarantee on purchase.

Makita LS1018 10-Inch Dual Slide Compound Miter Saw
  • Powerful 13.0 AMP direct drive motor requires less maintenance and delivers 4,300 RPM
  • Miters 0 degree to 47 degree left and 0 degree to 60 degree right, with positive stops at 0 degree, 15 degree, 22.5 degree, 31.6 degree, 45 degree (left and right)
PROS:
  • Easy to use
  • Produces both miter cuts and bevel cuts
  • Unmatched power and speed
  • Quite durable
CONS:
  • A tad bit heavy

Frequently Asked Questions (FAQs)

Q. What all can I do with a miter saw?

A miter saw can be used for straight and angular cuts across the surface and on the face of the wood you’re working with. It is mainly used for producing miter cuts for molding, rafters, etc. However, if you invest in a compound miter saw, you can also produce bevel cuts with it.

Q. 10 inch miter saw vs. 12 inch miter saw, which is better?

Considering both of them have a different purpose, there is no winner here. 10 inch miter saws are used for 2X6 inches or smaller woodwork. On the other hand, 12 inch miter saws are meant for tougher jobs as they provide deeper cuts.

Q. Are miter saw and chop saw the same?

No. Although a few woodworkers have the notion that these products are similar, the are actually quite different from one another. A chop saw can only provide straight cuts while a miter saw provides cuts that are more angled. Miter saws also produce bevel cuts.

Q. Can I use a miter saw to cut metal?

Yes and no. Not every miter saw is created equally, some come with a tough blade that can cut through metal easily while other are only built for woodwork and plastic. Therefore, it is recommended that you buy a tough miter saw if you’re looking to work with metal.

Q. Can miter saws cut straight?

Yes. Miter saws do come with the feature of cutting straight even though their forte is to cut in an angled manner.

Q. Do you really need a miter saw?

Miter saws are a DIYers paradise. They are such an advanced tool for carpentry that are also quite easy to use. On top of that, the output that you get with a miter saw is unmatched while there’s no going past its compound nature as its users can produce multiple types of cuts on different kids of materials.

A Final Word

Miter saws are a great tool to have in your inventory if you are a regular in carpentry. Not just for beginners, these saws can be used by even professional contractors making it a no brainer as an investment. If you are looking for working with light metal, wood, plastic that is 2X6 inches or smaller, it is highly recommended that you buy a 10 inch miter saw. In this article, we listed 5 of our favorite miter saws as of 2021.

On an ending note, we personally recommend you to buy:

Compound Miter Saw, TACKLIFE 10-Inch Sliding Miter Saw, with Double Speed (4500 RPM & 3200 RPM), 15...
  • 🎅2 Adjustable Speed & 3 Blades: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal. While the Tacklife EMS01A miter saw is equipped with 3 blades: two 10" 40T TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation.
  • 🎅Bevel Cutting & Laser Guide: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes.The Angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45°, respectively.The laser is attached to accurately track real-time position and allows you to perform precise cutting.

It comes with a sliding nature that allows to work with longer pieces of wood. It is ideal for making both bevel cuts and miter cuts but its most significant feature is the chip bag accessory connection which makes sure that all waste is collected in a separate place.

Last update on 2021-02-21 / Affiliate links / Images from Amazon Product Advertising API. BambooBottleCo is user-supported. We might receive a commission on any purchase you make through clicking links on this story.